As part of a kitchen refurbishment in Newquay, we connected and hardwired a client-supplied induction hob and extractor hood to existing pre-installed electrical supply points, with faceplates replaced to finish the job cleanly.
Kitchen refurbishments tend to involve a lot of trades working in sequence, and the electrical side of connecting fixed appliances is one of those stages that needs to be done properly before the kitchen can actually be used. For this Newquay property, the cabinetry and worktops were already in place and the local electrical supply points had been pre-installed in readiness – so the job was to get the hob and extractor hood connected up correctly and ready to use.
Both appliances were client-supplied. The induction hob was set into the worktop and required a hardwired connection to its dedicated supply point rather than a plug-in arrangement. Induction hobs draw a significant amount of current and need to be connected to an appropriately rated circuit – it’s not a job for a standard socket, and the connection needs to be secure and correct. The existing supply point was in place for this purpose, and the faceplate was replaced as part of the works to leave a clean finish.
The extractor hood was mounted above the hob and similarly hardwired into its local supply. Extractor hoods in a fitted kitchen are fixed appliances – they’re built into the cabinetry layout and aren’t going anywhere – so a hardwired connection via a fused connection unit is the right way to handle them. Getting the wiring routed neatly and the connection made properly means it works as it should and doesn’t cause problems further down the line.
With both appliances connected, everything was tested to confirm correct operation before signing off. The faceplates and outlets were replaced as needed throughout, keeping the finish consistent with the rest of the newly fitted kitchen.
It’s a straightforward scope of work on paper, but doing it properly – correct connections, appropriate ratings, clean finishes, and confirmed operation – is what separates a kitchen that works reliably from one that causes headaches later.