A return visit to a property in Lostwithiel to carry out a second phase of electrical works – connecting a client-supplied induction hob to an existing 32a dedicated circuit, adding surface-mounted double sockets in the garage, upgrading the towel rail fused spur to a decorative switch fused connection unit, rewiring garden festoon lighting into a weatherproof connection housing, and swapping a plain single gang switch for a polished chrome finish.
A kitchen in Liskeard gained much-needed task lighting with the installation of two LED cabinet lights, fitted neatly beneath the wall units. Clean, practical, and properly wired – a small job that makes a real difference day to day.
A residential consumer unit replacement in Mevagissey – an outdated board swapped for a fire-rated FuseBox 15-way RCBO unit with integrated surge protection, meter tails upgraded, fire-rated cabling installed, and a new 20A circuit added for a water misting system. Completed at short notice with an Electrical Installation Certificate issued on completion.
Wave Electrical Solutions replaced two exterior light fittings at a residential property in St Austell, fitting client-supplied PIR sensor units to the outside of the building. A straightforward swap carried out safely and to a clean finish.
A 15-way RCBO consumer unit replacement in Looe, with an integrated Surge Protection Device and upgraded meter tails, carried out in line with the 18th Edition of the IET Wiring Regulations.
A residential lighting upgrade in St Merryn covering circuit modifications, dimmer switch installation and LED downlight replacement – giving the homeowner full independent control over their living room lighting and a cleaner, more efficient hallway.
A commercial kitchen in Newquay needed its ageing single-phase consumer unit replaced with a 3-phase distribution board – giving the business the electrical capacity it needed now, with room to grow. The new 24-way 3-phase consumer unit was installed with upgraded 25mm tails and individual RCBO protection throughout, bringing the installation in line with the 18th Edition wiring regulations and enabling an Electrical Installation Certificate to be issued for Building Control notification.
A Bodmin homeowner needed a faulty exterior wall light replaced and a new outdoor socket added to the rear of their property. We fitted a 20W PIR LED floodlight with a proper IP-rated enclosure for the cable connection, and installed an IP-rated double socket outlet on the exterior wall, with the supply run from an existing internal socket – a clean, practical solution that makes full use of what was already there.
A kitchen renovation in Newquay required a full electrical first fix to support a completely new layout. The cooker supply and fridge freezer circuit were both relocated, new socket provisions were added to the utility/WC, and an existing socket was raised to counter height – all carried out ahead of the fit-out stage.
A full outdoor electrical upgrade at a residential property in Camborne – replacing worn exterior wall lights with IP65 stainless steel PIR downlights across six locations, adding two weatherproof outdoor sockets, installing a wired doorbell system, and upgrading the heating controls to the Hive Active Heating smart system.
A 2-gang antique brass dimmer switch fitted in a period property in Falmouth – replacing an older decorative unit with something that works properly and looks the part in a character home.
A residential property in Stithians received a range of electrical updates, including a new LED bathroom light bar, an IP-rated exterior bulkhead, client-supplied centre light fittings throughout the home, a converted 2-way garage lighting circuit, and a full consumer unit labelling check.